25/02/13How to install CXP / COF grabber driver
Take the Samadhi grabber as an example, it is divided into two wiring modes: CXP and COF. They share the same drive TucsenSetup1.1.4.11.exe and support operating systems installed in Windows 10 (x64) and above.
Installation steps:
1) Double-click the Samadhi grabber driver of the supporting U disk to start the installation.
2) Select the installation language, including Simplified Chinese and English, click OK.
3) Select the installation location, or for another folder, click Blinese. After the selection, click "Next".
4) Select additional tasks to decide whether to create a desktop shortcut as needed, not checked by default. After the selection, click "Next".
5) Prepare for the installation confirmation, check whether the setting is correct, and click "Install" after the confirmation.
6) Click Finish to end the installation. Note that after the end, please turn off the computer and restart it again (do not directly restart, otherwise the drive installation will fail), and the computer will complete the drive installation after starting up.
Samadhi After the drive installation is completed, open the computer device manager. When the drive installation is successful, the Samadhi grabber will appear under the device manager, showing Samadhi Coaxlink QSFP + (COF), as shown in the following figure:
